Least Cost Routing Configuration in NEC Univerge SV8100 AspilaEx

Automatic route selection, F-route, least cost routing in NEC Aspila topaz PBX provides call routing and digit translation based on the digits a user dials. Froute consists of look up tables that compare the dialed digits and decide which translation table should be used. The decision can optionally be dependent on time and day of the week. The translation table will then delete and / or add digits to select the trunk group and seize the outgoing trunk.

Programming:

1. In 11-01-01 select the digit 0 to 9, select number of digits and select type 6 -F route

2. In 44-01-01 Select 0 for No time schedule

3. In 44-02-01 Select the dial digits from 0 to 9 in dial analysis table 1 choose separate table for other digits 0 to 9

4. In 44-02-02 select service type as "2 ARS/Froute table

5. In 44-02-03 select additional data 1 for ARS/Froute table between 1 to 500 choose different table for different dial patterns

6. In 44-02-04 select 1 for dial tone simulation after dialing the digit selected in 11-01-01

7. In 44-05-01 select the Froute table used in prog 44-02-03, input the trunk group number

8. In 44-05-02 select 1-255 (digits) if you want to delete the leading digits

Note: This program is sufficient for normal ARS/Froute to function, for time based Froute need to add more commands.