ANALOG CALLER ID STATION SETUP IN NEC 2000 IPS
This feature enables caller id information from trunk and from extension to present in analog caller id terminals.
Hardware required: 4RSTF this card is required one per firmware processor and 8LCCD caller id enabled extension card.
Programming:
10 de 000 – 763 de assign
C200 if this card is installed in PIM0 / PIM1
C201 if this card is installed in PIM2 / PIM3
C202 if this card is installed in PIM4 / PIM5
C203 if this card is installed in PIM6 / PIM7.
This command is to configure 4RSTF.
0401 de 02 de 0: Caller id station.
This command is to specify the purpose of caller id sender card.
1220 de extension number de 0: to display only number, 1: to display both number and name.
08 de 507 de 1: To send.
This command specifies whether the calling station number is sent to the analog telephone with caller id facility when an internal call is terminated.
5000 de 8 de 0 or 9: trunk access code to be added.
This command enables a caller id station to call back when an external call is terminated, trunk should be a PRI or an analog trunk with caller id function.
08 de 266 de 0: Restrict one hit ringing for call forwarding all calls system wide
1581 de 00 to 15 class C of extension de 0: Restrict one hit ringing for call forwarding all calls extension class wise.
When caller id facility is required in all extensions in all PIM's then additional 4RSTF cards required.
0 comments:
Post a Comment