SIP PHONE INTEGRATION IN SV8100 - THIRD PARTY:SIP Phones works on the principle as VoIP Phones or soft phones. These are telephones that allow phone calls to be made using VoIP (voice over internet protocol) technology through LAN, WAN and Internet. NEC SV8100 allows to integrate third party SIP phones for cheap IP Phone solution from Snom, Grandstream to name a few.
1. This command is used to assign parameters for IPLA Package
10-03-02 = 1, Assign SIP trunk to use SIP phones
2. 10-12-09 = IP address, for IPLA Card, IP address should be with in the customer network if the system is connected to customer network.
3. 10-12-10 = Subnet Mask for IPLA Card
4. 10-40-01 = 1, Enable IP trunk availability
5.10-40-01 = no IPLA ports, based on 32 / 64 / 128 IPLA card used
6. 10-26-01 Enable Peer to Peer
7. 10-26-03 Enable Peer to Peer
8. 84-20-01 = 5070, Assign SIP Port
9. 84-26-01 = IP address, for every 16 DSP for 32 / 64 / 128 IPLA card.
1. This command is used to assign parameters for IPLA Package
10-03-02 = 1, Assign SIP trunk to use SIP phones
2. 10-12-09 = IP address, for IPLA Card, IP address should be with in the customer network if the system is connected to customer network.
3. 10-12-10 = Subnet Mask for IPLA Card
4. 10-40-01 = 1, Enable IP trunk availability
5.10-40-01 = no IPLA ports, based on 32 / 64 / 128 IPLA card used
6. 10-26-01 Enable Peer to Peer
7. 10-26-03 Enable Peer to Peer
8. 84-20-01 = 5070, Assign SIP Port
9. 84-26-01 = IP address, for every 16 DSP for 32 / 64 / 128 IPLA card.
This configuration will enable SV8100 to accept third party SIP phones, further we need to configure SIP phones also.Third party IP terminal licenses to be loaded in the system.
SIP Phones simplifies the network and reduce its cost also improves the communication level.
ReplyDeletehow to configure the new extension?
ReplyDelete11-02
ReplyDelete